Part Number 676 00 103
Resistive track printed on PET foil
Features:
– Linear, compact design
– Active length: 100mm; total width: 22mm
– Flat, durable and fully sealed
– Operating temperature -25 °C to +55 °C
Sensofoil PET-PET Linear 300mm
$13.81
Part Number 676 00 103
Resistive track printed on PET foil
Features:
– Linear, compact design
– Active length: 100mm; total width: 22mm
– Flat, durable and fully sealed
– Operating temperature -25 °C to +55 °C
– Wiper for PET-surface: 1-3N
How Does it Work?
A Sensofoil® membrane potentiometer PET-PET consists of a resistive track printed onto the bottom PET foil layer and a collector track printed onto the top PET foil layer. These layers are seperated by a so-called spacer. Only when the layers connect through mechanical pressure using a wiper a signal is produced.
Ideally, a low DC voltage is connected to the resistive track and tapped at the collector track in the form of a voltage divider. A linear relation exists between the length of the resistive track, or the angle of the resistive track for rotary sensors, and the applied voltage. At 50% of distance traveled, 50% of the applied voltage is measured.
Quality characteristics of the Sensofoil® membrane potentiometers are resistance values, their corresponding tolerances and the non-linearity. The non-linearity represents the actual deviation of the output signal to an ideal reference line and is expressed as a percentage of the applied supply voltage.