In-Line Load Cells

Though similar to load button load cells (by measuring pressure exerted on the sensor), in-line load cells can measure without direct contact by attaching to an intermediary object. For example, an in-line load cell could monitor an overhead crane or trolley to protect against overloading, or to measure the pressure between plates on a bridge.

KMM20 / KMM30

Specifications:
– Measuring range (kN): 0.1 to 5
– Output Signal (mV/V): 1.5 ±3%
– Linearity Dev. (%F.S.): < 0.2
– Protection: IP54
– Operating Temp. (°C): -10 to +70

Description:
– KMM20: easy to integrate w/ two threaded pins
– KMM30: offers two internal threads for easy adjustment
– Force direction: push / pull
– Operates with foil strain gauges

KMM62

Specifications:
– Measuring range (kN): 0.1 to 0.5
– Output Signal (mV/V): 1.0 ±2%
– Linearity Dev. (%F.S.): < 0.2 
– Protection: IP54
– Operating Temp. (°C): -10 to +70

Description:
– Offers compact form factor for tight applications
– Force direction: push / pull
– Operates with foil strain gauges 

FS50

Specifications:
– Measuring range (kN): 0.2 to 200
– Output Signal (mV/V): 2
– Linearity Dev. (%F.S.): < 0.1
– Protection: IP65
– Operating Temp. (°C): 0 to +70

Description:
– Low linearity deviation despite high forces
– Force direction: push / pull
– Operates with foil strain gauges 

FT50

Specifications:
– Measuring range (kN): 0.5 to 200
– Output Signal: 0..10 V / 4..20mA
– Linearity Dev. (%F.S.): < 0.1
– Protection: IP65
– Operating Temp. (°C): 0 to +70

Description:
– Includes an internal signal conditioner
– Force direction: push / pull
– Operates with foil strain gauges 

Let's Talk!

Have a question? Need a quote? Contact us today!